2. General Installation of IER + IER-F Extension Frame F
• There are two types of Frame Kits (LV1 & LV3) for installation of IER-F Landscape (Fig 4).
• Different from the IER Frame, be careful upon installation because the Frame F has no direction for left and
right. (Fig 5)
• There are two types of JIG hole gaps (240 mm, 270 mm) on the Frame F, but 240 mm is used mostly for
installation and
• 270 mm is used only when IER-Fs are extended (Fig 6).
Fig 4. FRAME F ( LV1, LV3 )
Fig 5. Different Shapes of IER Frame and F Frame Cabinet Joints (Directional)
Samsung Electronics
270mm
240mm
Fig 6. FRAME F JIG HOLE
2