Samsung IER Series Installation Manual page 26

3. Frame Installation
⑤ After installing the Bracket Center, install the lowest row cabinets.
⑥ After installing the cabinets, push the LED modules toward the middle and check the height
difference between the cabinets on both ends and the LED modules.
⑦ Roughly adjust the height difference between the left and right sides, and make fine adjustment
as shown below.
(See Fig.8.)
• If the height difference is greater than 0.5 mm, move the frame outwardly.
• If the height difference is smaller than 0.0 mm, move the frame inwardly.
• Adjust height difference each time an additional cabinet is installed.
It is not necessary to adjust a height difference in the 0.0 to 0.5 mm range.
⑧ After adjustment is completed, install the ⓑBracket Middle.
(See step ② for details on how to install.)
⑨ Lastly, install the ⓐBracket Side.
Fig.6 Installing cabinets
Cabinet
Height
difference
Fig.7 Checking height difference
Samsung Electronics
(See Fig.6.)
(See Fig.7.)
Height
difference
Height difference
smaller than 0.0 mm
Fig.8 Adjusting height difference
Height difference
greater than 0.5 mm
25