2-1. IER + IER-F Extension (Left to Right)
• Use the JIG F when installing the IER-F ("F") left to right on the installed IER Frame.
• Fasten an IER Frame Side and two Frame Fs on the JIG.
• Align the Stud of JIG with the JIG hole of the Frame, and then fasten the JIG screws.
*Be sure to check the hole locations – IER: 270 mm / IER-F: 240 mm
• Fasten the Frame F to the wall with screws.
Hole for screw
F FRAME
Fig 7. Shape of Mounted JIG F
IER
FRAME
JIG
SCREW
Samsung Electronics
①
F
Fig 8. IER-F Installed to the Left of IER
IER
88