Start-Up Procedures - Raven SmarTrax system Supplement Installation Manual

After installing the SmarTrax on your machine, always follow these start-up
procedures.
Turn the wheels fully from side to side numerous times to remove air
from the hydraulic system.
•
Time the wheels for full left to right and right to left of approximately 6-8
seconds. Refer to the Universal Kit Manual for instructions on this.
Adjust the pressure switch to the most responsive setting. Refer to the
Universal Kit Manual for instructions on this.
Manual # 016-0190-088
C
S U P
TART- P ROCEDURES
H A P T E R
6
13