Installation - Raven SmarTrax system Supplement Installation Manual

Redball 7830 SmarTrax Installation Manual

Installation

12
•
The cable does not need to be oriented in any way to the direction of
travel of the vehicle. Mount the sensor with the cable routed to avoid
tripping hazards or damaging the cable or yaw sensor.
•
Mount the Yaw Sensor to the floor inside of the vehicle's cab using the
double sided tape on the sensor or steel bolts or screws through the
mounting plate. See the Mounting the Yaw Sensor section on the
previous page for mounting location considerations.
•
Connect the supplied sensor cable to the Yaw sensor and to the Yaw Sensor
connector on the SmarTrax Interface cable.