Start-Up Procedures - Raven SmarTrax Installation Manual

After installing the SmarTrax on your machine, always follow these start-up
procedures.
Turn the wheels fully from side to side numerous times to remove air
from the hydraulic system.
Adjust the pressure switch to the most responsive setting. Refer to the
Universal Kit Manual for instructions on this.
S
TART-
Important: Time the wheels for a full left to right and
right to left time of approximately 8 - 10 seconds. Refer
to the Universal Kit Manual for additonal instructions on
this.
Manual # 016-0190-004
C
H A P T E R
6
U P
P ROCEDURES
15