Advertisement
3
WORK
3.13
Installing the battery (All 250/300 models, XC‑W US, XC‑W Six Days US)
Main work
–
Connect the battery charger to the battery. Set the battery charger.
Alternative 1
Battery charger XCharge-professional EU (00029095050)
Alternative 2
Battery charger XCharge-professional US (00029095051)
Alternative 3
Battery charger XCharge-professional GB (00029095052)
311910-10
Alternative 4
Battery charger XCharge-professional CH (00029095053)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
Finishing work
–
Mount the seat. (
Main work
–
Insert the battery into the battery compartment with the terminals facing forward
and secure with holding bracket
(XC‑W US, XC‑W Six Days US, All 250/300 EU/AU/US models)
Battery (HJTZ5S-FP)
(300 EXC BR)
Battery (YTX5L-BS)
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Connect positive cable
Guideline
Screw, battery terminal
–
Slide positive terminal cover
–
Connect negative cable
H00386-10
Guideline
Screw, battery terminal
Contact disks
the claws toward the battery terminal.
Finishing work
–
Mount the seat. (
p. 16)
.
.
to the battery.
over the positive terminal.
to the battery.
must be mounted under screws
p. 16)
3 months
M6
10 Nm (7.4 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
M5
2.5 Nm
(1.84 lbf ft)
and cable sockets
23
with
Advertisement
