Advertisement
2
SETUP
(All EXC/EXC Six Days models)
–
Position the turn signal indicator lamp
H01768-10
(all EXC/EXC Six Days models, 125 XC‑W)
–
Position the connector retainer and speedometer on the upper triple clamp.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
402736-10
(XC‑W US, XC‑W Six Days US)
–
Position the speedometer on the upper triple clamp.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
–
Route the clutch line with the clutch master cylinder toward the front between
the upper and lower triple clamps.
402737-10
–
Install the fork legs. (
(All standard EXC/XC-W models)
–
Remove screws
–
Move the handlebar supports to the desired position and mount and tighten
screws
Guideline
Screw, handlebar support M10
S01414-10
–
Position the handlebar.
–
Position the handlebar clamps. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp
E00483-01
.
p. 20)
and take off handlebar supports.
.
Info
Position the left and right handlebar supports evenly.
Info
Make sure the cables and wiring are positioned correctly.
in the speedometer bracket.
M6
with the collar bushings.
M6
40 Nm
Loctite
(29.5 lbf ft)
M8
20 Nm
(14.8 lbf ft)
4
10 Nm
(7.4 lbf ft)
10 Nm
(7.4 lbf ft)
®
243™
Advertisement
