3
WORK
3.1
Raising the motorcycle with a lift stand
3.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
3.3
Removing the seat
3.4
Mounting the seat
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
401943-10
–
Remove screws
–
Raise the rear of the seat, pull the seat back, and lift it off.
V00342-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and push it forward.
–
Make sure that the seat is correctly locked in.
V00343-10
.
to the ground with your foot and lean
16