Advertisement
3
WORK
3.14
Installing the front fender
3.15
Removing the headlight mask with the headlight
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
V00341-11
–
Mount and tighten screws
Guideline
Remaining screws, chassis
V00340-11
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Switch off all power consumers and switch off the engine.
–
Detach the brake line and wiring harness from the headlight mask.
–
Release rubber bands
E00355-10
(All EXC/EXC Six Days models)
–
Detach plug-in connectors
light.
E00356-10
(All XC‑W/XC‑W Six Days models)
–
Detach plug-in connector
light.
E00357-10
M6
.
M6
p. 25)
. Slide the headlight mask up and swing it forward.
and take off the headlight mask with the head-
and take off the headlight mask with the head-
.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 25)
24
Advertisement
