Advertisement
3
WORK
3.16
Installing the headlight mask with the headlight
3.17
Checking the headlight setting
Main work
(All EXC/EXC Six Days models)
–
Connect plug-in connectors
E00356-11
(All XC‑W/XC‑W Six Days models)
–
Connect plug-in connector
E00357-11
–
Position the headlight mask and fix it with rubber bands
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line guide.
E00355-11
Finishing work
–
Check the headlight setting. (
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle vertically a distance
Guideline
Distance
400726-10
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with rider.
»
If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
.
.
p. 25)
.
under the first mark.
5 cm (2 in)
away from the wall.
5 m (16 ft)
p. 26)
25
Advertisement
