2
SETUP
–
Position spring as shown.
Spring
S01399-10
–
Press the spring with special tool
Pliers for footrest spring (79029083000)
The special tool is applied to area
–
Mount pin
S01400-11
–
Mount the washer and split pin
S01401-11
–
Position the frame protectors on both sides.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount and tighten screws
Guideline
Screw, frame protector
S01468-10
–
Mount the cable tie(s).
(All Six Days models, EXC AU)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the delivery (optional).
Info
Read the accompanying KTM PowerParts fitting instructions.
–
Apply the sticker included in the delivery (optional).
–
Set kilometers or miles. (
–
Set the speedometer functions. (
–
Set the clock. (
–
Refuel. (
engages in area
.
.
.
.
.
with the washers.
p. 26)
p. 28)
p. 28)
p. 29)
p. 27)
on the footrest.
M5
3 Nm (2.2 lbf ft)
M5
3 Nm (2.2 lbf ft)
14