Fuel Beds; Install Birch Log Kit 700Blk - Valor G3.5 Installation Manual

Installation

Install Birch Log Kit 700BLK

Material required
• Birch Log Kit, which contains:
• 10 logs
• 1 bag of embers
G1 G2
H7
G6
• Gloves, if desired
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
1. Confi rm the front edge of the rear log support is
fl ush with the cutout in the burner support
platform.
20
G3 G4
G5
H10 H11
H9
2. Place log G4 directly on the burner, and slide it all
the way to the left. There is a groove on the
underside of the log that fi ts on the front rail on the
burner.
3. Place log H10 in the front left cutout in the burner
platform with the long end pointing to the left.
longer on
left side
H10
4. Place log H11 in the front right cutout in the burner
platform. Orient the H11 with its angled end
pointing to the right.
H10

Fuel Beds

G4
G4
G4
Angled
H11
end