CSA approved for use with Valor Models 738 and 739 Heaters ONLY
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
The 742CFB Traditional Cast Front is designed to be used along with an outer
surround trim (supplied separately) on the 738 or 739 Valor Legend G3 heaters.
The Traditional Front fi ts within the outer surround trim and clips onto the
standard mounting brackets supplied with the heater. The Traditional Front is
compatible with all outer surround trims and cast iron surrounds available for use
with the 738 and 739 heaters.
Casting Tolerances
Due to the nature of cast iron, dimensional consistency may vary from one unit
to the next and some variation in surface fi nish and fl atness is to be expected.
We have done our best to control and make allowance for this; however some
variation is inevitable.
29-1/4" (74,3 mm)
4001896-04
© Copyright Miles Industries Ltd., 2014
L
EGEND
742CFB Traditional Cast Front
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Outer Trim
Supplied
Separately
G3
with the appliance.
for future reference.
Note: This kit must be installed
or serviced by a qualifi ed
installer, service agency or gas
supplier. These instructions are
to be used in conjunction with
the main installation instructions
for the above listed heater
model.
Barrier Screen
Overview
(Heater and trim sold separately)
IN STA LLER
Leave this manual
CO N SUM ER
Retain this manual
738 or 739
Traditional Cast Front
Trim