Install Driftwood Log Kit 700Dwk - Valor G3.5 Installation Manual

Installation

Install Driftwood Log Kit 700DWK

Material required
• Traditional Log Kit, which contains:
• 8 logs
• 3 pebbles
• 1 bag of embers
• A steel cover panel
G11
G4
G14 G14
H18 H18
• Gloves, if desired
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
26
G12 G12
G13 G13
H20 H20
H21 H21
1. Confi rm the front edge of the rear log support is
fl ush with the cutout in the burner support
platform.
2. Place log G4 directly on the burner, and slide it all
the way to the left. There is a groove on the
underside of the log that fi ts on the front rail on the
burner.
Fuel Beds
G4