Warranty & Return Policy - TWR Lighting E-1DBSL Manual

TWR Lighting, Inc. ("TWR") warrants its products (other than "LED Product") against
defects in design, material (excluding incandescent bulbs) and workmanship for a period ending on
the earlier of two (2) years from the date of shipment or one (1) year from the date of installation.
TWR Lighting, Inc. ("TWR") warrants its "LED Product" against defects in design, material
and workmanship for a period of five (5) years from the date of shipment. TWR, at its sole option,
will, itself, or through others, repair, replace or refund the purchase price paid for "LED Product"
that TWR verifies as being inoperable due to original design, material or workmanship. All
warranty replacement "LED Product" is warranted only for the remainder of the original warranty of
the "LED Product" replaced. Replacement "LED Product" will be equivalent in function, but not
necessarily identical, to the replaced "LED Product."
TWR Lighting, Inc. ("TWR") warrants its "LED Product" against light degradation for a period
of five (5) years from the date of installation. TWR, at its sole option, will, itself, or through others,
repair, replace or refund the purchase price paid for "LED Product" that TWR verifies as failing to
meet 70% of the minimum intensity requirements as defined in the FAA Advisory Circular
150/5345-43E dated 10/19/95. All warranty replacement "LED Product" is warranted only for the
remainder of the original warranty of the "LED Product" replaced. Replacement "LED Product"
will be equivalent in function, but not necessarily identical, to the replaced "LED Product."
Replacement parts (other than "LED Product") are warranted for 90 days from the date of
shipment.
Conditions not covered by this Warranty, or which might void this Warranty are as follows:
• Improper Installation or Operation
• Misuse
• Abuse
• Unauthorized or Improper Repair or Alteration
• Accident or Negligence in Use, Storage, Transportation, or Handling
• Any Acts of God or Nature
• Non-OEM Parts
The use of non-OEM parts or modifications to original equipment design will void
the manufacturer warranty and could invalidate the assurance of complying with
FAA requirements as published in Advisory Circular 150/5345-43.
M.2006 MANUALS.E-1DBSL
REV. 08/10/04, 12/09/05, 2/08/06, 04/11/06 (load resistor)
REV. 06/21/06 (part numbers), 7/13/06 (Appendix & 6.0 Major Comp. List)
REV 10/20/06 (Appendix & parts lists)
REV. 04/10/07 (text)
DUAL MEDIUM INTENSITY LED/STROBE
MODEL E-1DBSL
Warranty & Return Policy