TWR Lighting E-1DBSL Manual page 24

DUAL MEDIUM INTENSITY LED/STROBE
M.2006 MANUALS.E-1DBSL
REV. 08/10/04, 12/09/05, 2/08/06, 04/11/06 (load resistor)
REV. 06/21/06 (part numbers), 7/13/06 (Appendix & 6.0 Major Comp. List)
REV 10/20/06 (Appendix & parts lists)
REV. 04/10/07 (text)
MODEL E-1DBSL
To troubleshoot the red beacon portion:
1) turn power off at circuit breaker to reset the light system,
2) pull Relay K8 out of socket, and set SW3 to nightmode (upward
position),
3) then turn power on at circuit breaker. Observe the red LED Beacon.
IF: Beacon steady burns replace M3 (Flasher)
IF: No light – check F5 fuse. If F5 fuse is good, replace the red LED
Beacon.
19