SaMASZ KDF 260 Operator's Manual page 6

11 9
8
4
Fig. 2b. Parts of SaMASZ front disc mower with roller conditioner.
1 – Suspension frame
2 – Main frame
3 – Roller conditioner
4 – Cutterbar
5 – Intersecting axis gear
6 – Intersecting axis gear
Drive from tractor's rpm is transmitted through PTO shaft, intersecting axis gear (5), cutterbar drive
shaft (7) and intersecting axis gear (6) to the cutterbar (4). On the cutterbar there are discs with two
knives each. The extreme discs have additional forming drums. Apart from that, drive from tractor's
rpm through intersecting axis gear (5), tine conditioner driver shaft (8) and roller conditioner gearbox
(9) is transmitted to roller conditioner (3). Cutterbar is connected to the main frame (2) along with
suspension frame (1). On the suspension frame there is mower's triangle, which is designed to connect
the mower to tractor's front 3-point linkage. Over the cutterbar there are safety guards (11).
10
7
3
Fig. 2c. Parts of SaMASZ front disc mower.
Operator's manual
12 10
3
7 – Cutterbar drive shaft
8 – Roller conditioner drive shaft
9 – Roller conditioner gearbox
10 – Hydraulic cylinders
11 – Safety guards
12 – Support springs
8 9
KDF 260 S/W; KDF 300 S/W;
1
5 10
4 9
1
5
Front disc mower
KDF 260; KDF 300;
12
6
7
8
5
6
2
2