Fig. 8b. Front disc mower in its transport position.
4.5. Mounting PTO shaft
PTO shaft's end with friction clutch should be mounted on mower's side.
When connecting PTO shaft between tractor and mower make sure, that external guard tube of the
shaft is on the tracor's side. The PTO shaft plastic guards have to be secured by fastening their small
chains to immovable parts of tractor and mower.
Operator's manual
CAUTION:
If need be, shorten the PTO haft according to its operator's manual.
CAUTION:
Use the machines with PTO shafts designed to drive them. Before
the work begins, check the safety guards (in tractor, mower and
PTO shaft), if they are placed correctly and are not damaged.
Damaged or lost parts must be replaced with genuine ones. Make
sure the PTO shaft is properly mounted. It is forbidden to approach
the rotating parts, because it may lead to serious injuries or even
death. All service and repair operations must be done only after the
tractor engine has been stopped, all rotating parts have come to the
complete standstill and the cutterbar is on the ground. Before the
operation begins, read operator's manuals of both the machine and
PTO shaft.
Front disc mower
KDF 260; KDF 300;
KDF 260 S/W; KDF 300 S/W;
13