Quickstart - Visual Productions CUECORE2 Manual

Chapter 3

Quickstart

This chapter provides step by step tutorials on how to program your CueCore2
for some typical tasks:
Playback lighting scenes based on the scheduler
Choose between different lighting scenes via incoming UDP messages
Record a show from an external DMX console
3.1 Playback based on scheduler
This tutorial shows how to create a lighting scene and have it activated at a
certain time of the day. The scene will be de-activated at another time. Follow
the steps below:
1. Connect to the network
Connect the CueCore2 with an Ethernet cable to the router.
is required that the network is managed by a router that fea-
tures a DHCP server.
ble then read the network chapter on page 30 for alternative setups.
If the network router is not DHCP capa-
17
It