Quickstart - Visual Productions QuadCore Manual

Chapter 3

Quickstart

This chapter provides step by step tutorials on how to program your QuadCore
for some typical tasks:
Playback lighting scenes based on the scheduler
Choose between different lighting scenes via incoming UDP messages
Record a show from an external DMX console
Configure as Art-Net Node
3.1 Playback based on scheduler
This tutorial shows how to create a lighting scene and have it activated at a
certain time of the day. The scene will be de-activated at another time. Follow
the steps below:
1. Connect to the network
Connect the QuadCore with an Ethernet cable to the router.
required that the network is managed by a router that features a DHCP
server. If the network router is not DHCP capable then read the network
chapter on page 32 for alternative setups.
17
It is