Visual Productions CUECORE2 Manual page 104

Description
Playback Go Forward
Playback Go Back
Playback Jump
Release playback
Set playback intensity
Set playback rate
Release all playbacks
Set master intensity
Set master rate
Set master fade
Description
Execute action
Enable actionlist
Description
Blink LED
Command Description
Go Jump to a cue of a playback.
TimedGo Jump to a cue of a playback with a fade time.
GoOff Release a playback.
GoJamClock Jump to a cue of a playback and start internal time code.
StandbyFw Jump to a cue of a playback and then pause the playback.
StandbyBw Jump to a cue of a playback and then pause the playback.
URL
/ajax/pbXX/go+
/ajax/pbXX/go-
/ajax/pbXX/jump
/ajax/pbXX/release
/ajax/pbXX/intensity
/ajax/pbXX/rate
/ajax/release
/ajax/intensity
/ajax/rate
/ajax/fade
The following table uses actionlist #1 as an example. The number '01' can
be replaced by any number in the range of [01,08].
URL
/ajax/alXX/2/execute
/ajax/alXX/enable
URL
/ajax/blink
You can send your HTTP GET requests to port 80.
D.4 MSC
The CueCore2 can also be remote controlled via MIDI Show Control. The fol-
lowing commands are available.
Commands for playback master:
Parameter Range Example
- http://192.168.1.10/ajax/pb01/go+
- http://192.168.1.10/ajax/pb01/go-
[1,32] http://192.168.1.10/ajax/pb01/jump
- http://192.168.1.10/ajax/pb01/release
[0%,100%] http://192.168.1.10/ajax/pb01/intensity=55
[-100%,100%] http://192.168.1.10/ajax/pb01/rate=55
- http://192.168.1.10/ajax/release
[0%,100%] http://192.168.1.10/ajax/intensity=55
[-100%,100%] http://192.168.1.10/ajax/rate=55
text http://192.168.1.10/ajax/fade=3s
Parameter Range Example
- http://192.168.1.10/ajax/al01/2/execute
true/false http://192.168.1.10/ajax/al01/enable=false
Parameter Range Example
- http://192.168.1.10/ajax/blink
Parameters
-
Playback=qlist Cue=qnumber fadetime=timecode
if qnumber is the active cue or qnumber equals 0xFF
Playback=qlist Cue=qnumber
Playback=qlist Cue=qnumber
Playback=qlist Cue=qnumber
104