Visual Productions CUECORE2 Manual page 103

String
core-tm-1-start
core-tm-1-stop
core-tm-1-restart
core-tm-1-pause
core-tm-1-set= text
The following table uses variable #1 as an example. The number '1' can be
replaced by any number in the range of [1,8].
String
core-va-1-set= integer
core-va-1-refresh
core-va-refresh
The following table shows how to active miscellaneous functions.
String
core-dmx-1= integer
core-blink
core-hello
D.3 HTTP
HTTP (Hyper Text Transfer Protocol) is the standard protocol to access web
pages. It can also be used to control the CueCore2, using the URLs listed below.
The following table uses playback #1 as an example. The number '01' can
be replaced by any number in the range of [01,06].
Description
Start timer #1
Stop timer #1
Restart timer #1
Pause timer #1
Set timer #1 at the time-string
Description
Set the value of variable #1
Refresh variable #1; a trigger will be generated as if the
variable changed value
Refresh all variables; triggers will be generated
Description
Set the value of a DMX channel
Momentarily flashes the CueCore2's LED
The unit will reply with the same Hello message
103