Visual Productions CUECORE2 Manual page 32

By briefly pressing the reset button on the device it toggles between
static and automatic IP addresses. By pressing and holding the reset
button (see figure 5.2) on the device for 3 seconds, it will reconfigure the
unit to the factory default IP address and subnet mask. No other settings
will be changed. The default IP address is 192.168.1.10 with the subnet
mask set to 255.255.255.0.
5.2 Web-interface
The CueCore2 features an inbuilt web-server. This web-interface can be accessed
via a standard browser. It is recommended to use any of the following browsers:
Microsoft Edge
Google Chrome (v59 or higher)
Apple Safari (v10 or higher)
Mozzila Firefox (v54 or higher)
The web-interface enables you to configure and program the CueCore2.
When browsing to the unit the home page (figure 5.3) will appear first. The
home page is read-only; it provides information but does not allow for changing
any setting. The other pages present many settings that can be edited. These
pages will be discussed in the subsequent chapters.
5.2.1 Uptime
This field indicates how long the unit has been alive since its last reboot.
Figure 5.3: Home page
32