Visual Productions CUECORE2 Manual page 76

13.3 Set Date & Time
The computer's date and time can be quickly copied to the unit by selecting a
device and clicking the Set Date & Time button. Not all Visual Productions
devices feature an internal real-time clock.
13.4 Blink
The device's LED can be set to blink fast for identifying the particular unit
amongst multiple devices. The blinking is enabled by double-clicking on a device
in the Devices list or by selecting a device and then clicking the Blink button.
13.5 Factory Defaults
All the user data like cues, tracks and actions are stored on the memory. They
will be completely erased and all settings will reverted to their defaults by
pressing the Factory Defaults button. This action does not affect the device's
IP settings.
13.6 RTC Calibration
The CueCore2 features an internal real-time clock (RTC) that is used for gen-
erating scheduler triggers (date, time, sunrise, etc). In case that the clock is
drifting, i.e. slowly falling behind or getting ahead of the real time, then it can
be calibrated again using the vManager. The procedure is as follows:
1. Select the CueCore2
2. Click on the 'Start RTC Calibration' button
3. wait approximately 30 minutes
4. Click on the 'Stop RTC Calibration' button
5. Apply the recommended calibration value in the dialog (figure 13.4)
Figure 13.4: Apply calibration value
76