Visual Productions CUECORE2 Manual page 40

putted live.
The 'Track Preview' is a useful option to briefly test the content stored in a
track without having to configure a playback for it. Please note that any active
playback will be released when the Track Preview is enabled.
Inside the Console page the DMX values of the track can be changed by us-
ing the Command-line interface. The following table offers examples of the
supported commands.
Command
1 @ 50 ENTER
1 + 2 @ FULL
1 THRU 3 @ 0
1 THRU 3 + 5 @ 0 ENTER
ALL @ 100 ENTER
1 @ + 10 ENTER
ALL @ 20 ENTER
By default the Console page presents the DMX values in percentage (%). When
the representation is switched to decimal (by using the 'Decimal' button) then
the values in the table above would be interpreted as decimal values as well.
E.g. 1 @ 50 ENTER would set the channel at decimal value 50 which relates to
Figure 7.2: Console page
Function
Sets channel 1 at 50%
Sets channel 1 and 2 at 100%
Sets channels 1 through 3 at 0%
Sets channels 1, 2, 3, and 5 at 0%
Sets all channels in the selected universe at
100%
Increases channel 1 value with 10%
Decreases all channels in the selected universe
by 20%
40