Visual Productions CUECORE2 Manual page 96

Feature Function
Set Value Set
Set Value Toggle
Set Value Control
Set Value Inverted Control
Set Value Decrement
Set Value Increment
Set Value Control Scaled
Set Value Control Offset
Refresh Set
Single Dimmer Set
Variables are further explained on page 57.
The Single Dimmer feature is used to increase or decrease a level by using
only one switch. When controlling this task through a GPI action , then closing
the GPI will increase or decrease the level. Opening the GPI port will freeze on
the current level. This feature is useful for controlling an intensity will just one
button.
B.12 System
Miscellaneous tasks.
Feature Function
Blink Set
Blink Toggle
Blink Control
The Blink feature controls the LED on the unit as seen in figure 5.2.
B.13 Action
Use the Link feature to have one action trigger another action.
Feature Function
Link Set
Parameter 1
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Variable #
Parameter 1 Parameter 2
On or Off -
- -
- -
Parameter 1 Parameter 2
Action -
96
Parameter 2
Number in the range of [0,255]
Number in the range of [0,255]
-
-
-
-
-
-
-
Delta