Identifying Options - Waters 2707 Operator's Manual

Identifying options

With the factory-installed sample cooling option, the instrument has a cooling
fan at its back (see the preceding figure) and a cooling cover in its sampling
compartment (see the following figure). It also includes the following parts:
Tubing guide
Wash/waste
These are the user-installable options:
• Biocompatible sample flow path and valve – Inert sample needle (Silco
steel) and biocompatible valve (PEEK
• Prep kit for large-volume sampling – 2500 µL syringe, prep valve,
10000-µL sample loop, large sample volume (LSV) needle, and sample
tray for 10-mL vials
• Air needles – Six types, each for a different type of well/vial plate, for
pressurizing sample vials of varied heights during aspiration
Cooling cover
(with cooler
option)
Condensed water/leakage
®
)
Identifying options
®
1-5