Tecway Mecpower POLI GO AROUND Manual page 3

1) Voltage using range is 105V
is 110V / 220V, the specific use of voltage according to the
nameplate on the door shown. The use of the machine voltage
must be correct, otherwise it will make the machine hard to
repair damaged.
2) The power plug must be inserted firmly, and keep the power
cord can not pull too tight, damaged, to prevent personal
injury and power supply short circuit, leakage.
3) At the first time to operate, please set coin selector and
game setting to make machine can work properly.
4) Check each function frequently.
1) Please maintain machine regularly to check each function can be operated
normally.
2)
Shut down power switch when changing the parts to avoid any injury.
3)
Use the same model when changing the parts to avoid any damage.
4)
Check the wire connection and voltage output after changing power supply
box.
5)
Working voltage of PCB is 12.1V~12.4V.
6) Before sending PCB for repair, please do leakage inspection and internal
voltage & power supply to ensure PCB is damaged or not.
Usage Attention
115V/215V
~
Maintenance
Cleaning
225V，Rated voltage
~
2