Tecway Mecpower POLI GO AROUND Manual page 20

Installation for card（Suggest thickness 0.4mm、quantity 200 pcs）
Remark：Before installation, must be powered off.
A、Install the cards at the front.
1）Loosen the screw and take out the door.
2）Take out the plate.
3）Put cards.
4）Put the plate on the cards.
5）Put the door on and tighten the screws.
B、Install the cards from back side.
1）Take out the plate.
2）Put cards.
3）Put the plate on the cards.
Door
DIP switch instruction on Card dispenser ：
The setting cannot be adjusted; please restore the setting if it
is changed.
Item 1 2
Content OFF
Plate
Screw
3 4
OFF
5 6 7
OFF OFF
8
19