1. Manuals
  2. Brands
  3. Tecway Manuals
  4. Arcade Game Machines
  5. Mecpower POLI GO AROUND
  6. Manual

Tecway Mecpower POLI GO AROUND Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
POLI GO AROUND

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mecpower POLI GO AROUND and is the answer not in the manual?

Questions and answers

Related Manuals for Tecway Mecpower POLI GO AROUND

Summary of Contents for Tecway Mecpower POLI GO AROUND

  • Page 1 POLI GO AROUND...

  • Page 2: Safety Attention

    Safety Attention 1) The machine has a high-voltage at internal part, the adjustment must be operated by technician to avoid any personal injury or damage caused. 2) When checking and maintaining, please cut off the power before proceeding. 3) Please shut off the door of machine. Before opening the door, please turn off the power switch.
  • Page 3 Usage Attention 1) Voltage using range is 105V 115V/215V 225V，Rated voltage is 110V / 220V, the specific use of voltage according to the nameplate on the door shown. The use of the machine voltage must be correct, otherwise it will make the machine hard to repair damaged.
  • Page 4 Wipe the machine with a clean, soft cloth. To avoid any damage on the surface, please do not clean the machine with the stuff below.  Deteriorated cleaner  Acidic cleaner  Pesticides, disinfectants, alcohol or other chemical products Attention for movement or transportation When moving or transporting, please pay attention on disassembly to prevent damage to the machine.
  • Page 5 1. Game machine introduction...

  • Page 6: How To Play

    2. How to play Two players can play at the same time. After inserting the coin, a very beautiful commemorative card will be sent out at the exit of the card, and player can take it as a souvenir. After the card is sent out and the music plays, and voice prompts during the game, please sit and hold;...

  • Page 7: Technical Parameters

    3. Technical parameters Using voltage：AC220V/110V（50/60HZ） Max currency：0.7A/1.6A （Remark：Actual using voltage and currency are depends on the nameplate on machine.） Maximum power：270W Standby power：80W Token diameter：φ21mm φ30mm Token thickness：1.2mm 2.5mm Capacity of coin box：φ25mm*1.5mm 代币约 3000 枚 Environment ： room temp.-5 C, ambient humidity ＞...
  • Page 8 Spare parts： Photo Name Spec/Model No. Qty. Fuse 6A（大） 1285＃ 1396＃ Power cord 3*1.5 Manual Game cards 87.5*57.5*0.4mm...
  • Page 9 4. Movement First, loose the nut of foundation to rise up and touch the nut at machine’s bottom Unplug the power cord from power supply box. F o u nd a t i o n w he e l 3) Can push machine from the front or back side. Need 2 people to process. Remark：If the floor is not flat or has a tilt to it when moving machine, please pay attention to the force and prevent the crash of handling to the machine.

  • Page 10: Installation

    5. Installation Please follow the steps of installation at the first time. Select the area Place the machine with the same type of others according to its play classification and appearance. Please refer to the suggested position and dimension below to place machine. Make an enough space for daily normal operation and ensure customers can play comfortably.
  • Page 11 Attention：Machine has to be placed on flat ground. 5.2 How to fix Foundation Wheel 5.3 Check connection before power input Check the internal structure of the machine for any looseness caused by transportation. The wire connector terminals should not fall out of the port. Check the ground wire is connected to the ground.

  • Page 12: Power Input

    Attention Do not put heavy stuff on the power cable. That could cause a short circuit, even a fire. The wire cannot be forced to stretch and bend. Do not expose the wire to near the stuff with high temp. Do not put wire where to be kicked or touched easily.
  • Page 13 1) Ensure machine’s input voltage is same as the nameplate. 2) Turn on the power switch after inputting the power. 3) Adjust coin selector to make sure it can work properly. 4) Adjust card dispenser to make sure it can work properly. Open the maintenance door, find the setting switch on the main board, and then set the game contents according to the actual situation of the site (see setting table below).

  • Page 14: Check Before Operation

    6. Check before operation To ensure the machine can work properly and safety concern, it is necessary to do daily inspection before the operation. Check the items below： 1) Power input wiring is fixed well and no damage. 2) Ensure machine is fixed well. 3) Confirm there’s no damage on the appearance.

  • Page 15: Game Setting

    8. Game setting Select the settings and results, according to DIP switch (ON / OFF) position on setting table, set the game's play, time, demo music time, background music selection. Check and confirm the 4 small switches of SW2 on main board to be OFF (default and can not adjust) There are 8 small switches of SW1 on main board for setting game play, time…etc.
  • Page 16 SW1 setting table： Bold font is factory default Item Content Game time 120s 180s 240s 300s Demo music 360s Waiting time Coins per one game Background music NO.1 NO.2 How to set： 1）Game time: This setting is to determine the time of each game. If you set "120S", then each game time is 120 seconds.
  • Page 17 9. Adjustment Coin selector adjustment Token entry regulator Currency slot Token tolerance trim resistor Power/Signal input GRAY COUNTER(+/-) Withdrawal DC+12V WHITE COIN SIGNAL COIN signal normally BLACK GROUND GRAY COUNTER(-/+) lever switch N.O. 精准 正常 N.C. COIN signal 100ms SLOW 50ms MEDIUM 25ms FAST wavelength adjustment...

  • Page 18: Volume Adjustment

    Volume adjustment 功放板 Amplifier board Amplifier Board Volume Potentiometer Volume Adjustment ： Open the coin door and find the volume potentiometer on amplifier board, adjust the volume by turning it. Turn the potentiometer clockwise to make the sound louder; turn counterclockwise to make it smaller. ！...
  • Page 19 9.3 Adjustment for card dispenser Adjust the thickness of card 1）Loosen screw counterclockwise and move gate door up and down. 2）Turn the adjustment screw clockwise to move the door upward. 3）Put the sample card in the same time adjust the "adjustment screw" until the card can be out successfully (press the card key test).
  • Page 20 Installation for card（Suggest thickness 0.4mm、quantity 200 pcs） Remark：Before installation, must be powered off. A、Install the cards at the front. 1）Loosen the screw and take out the door. 2）Take out the plate. 3）Put cards. 4）Put the plate on the cards. 5）Put the door on and tighten the screws. B、Install the cards from back side.

  • Page 21: Daily Inspection

    10. Maintenance !Warning Non-professional technicians do not check and maintain to avoid personal injury and damage to the machine. Ensure to turn off the power then do the maintenance Do not pot tools or other object in machine to avoid any malfunction. After inspection, please install all parts and tighten the screws.

  • Page 22: Troubleshooting

    PCB board Use a small brush to clean the dust and dirt. 11. Troubleshooting Situation Caused reason Troubleshooting There is no currency coin in Put the coin in currency slot. slot. Can not Adjust the sensitivity of the token. The sensitivity of the token insert the is too high.
  • Page 23 续上表 The line of light box is Connect the light box line disconnected Light box does not Main board is damaged Repair or change main board rotate Motor of light box is Change the motor damaged Motor of pointer's line is Connect the motor of pointer's line disconnected Pointer does...

  • Page 24: Wiring Diagram

    12.Wiring diagram 控制箱灯带1 控制箱灯带3 O3-1 O3-1 B/W3 B/W3 G/W3 G/W3 R/W3 R/W3 控制箱灯带2 控制箱灯带4 O3-1 O3-1 B/W3 B/W3 G/W3 G/W3 R/W3 R/W3 转盘灯带1 O3-1 O2-1 +12V B/W3 B/W2 Bla4 信号1 G/W3 G/W2 信号2 R/W3 R/W2 +12V 彩 信号3 DC IN 色...

Table of Contents