Vanderbilt ACT365-VCU Installation And Operating Instructions Manual page 27

ACT365-VCU / ACT365-VCU2A / ACT365-VCUPoE – Installation and Operating Instructions Configuring ACT365-VCU
1. Power off the ACT365-VCU.
2. Configure the unit DIP switches as pictured below. (ON = 2,4; OFF = 1,3)
3. Power up the ACT365-VCU. Wait for the red LED to flash.
4. Reset all DIP switches to the OFF position, as pictured below. (OFF = 1, 2, 3, 4)
5. The LEDs will turn off and the unit will reboot.
The ACT365-VCU is now defaulted to factory settings.
© Vanderbilt 2019 27 A-100528-b
20.05.2019