Table of Contents
Advertisement
ACT365-VCU / ACT365-VCU2A / ACT365-VCUPoE – Installation and Operating Instructions
Vanderbilt recommend using a name that describes the camera location, for example, Front Door.
6. Select the Record check box if the ACT365-VCU should record camera footage. The ACT365-VCU
will record approximately 20 days of camera footage (dependent on the type of scene the camera is
viewing). Once the ACT365-VCU data storage limit is reached, data is recycled. When data is
recycled, the oldest data is removed first.
If you do not select Record, the ACT365-VCU will support live view only.
7. Click Add.
The camera is added to the ACT365 Installer Portal at ACT365.eu.
A summary of the camera settings is displayed on the Cameras tab.
After a camera has been added, the camera details appear in the Selected Cameras list and the camera is
accessible on ACT365.
5.4 Installing ACT365-VCU on the ACT365 Installer Portal
To add an ACT365-VCU to a customer site on the ACT365 Installer Portal:
1. Log in to the ACT365 Installer Portal at ACT365.eu.
2. Enter the customer portal from the ACT365 Installer Portal.
To do this:
a. Click Customers to open a list of customers.
b. Click the Enter Customer Portal icon
portal.
3. Click Hardware > ACT365 VCUs.
4. Click ADD ACT365 VCU.
5. Enter the ACT365-VCU details.
a. Enter the Controller Unique Identifier (CUID). This is printed on the label on the bracket beside
the PCB.
b. Enter the name of the ACT365- VCU. Vanderbilt recommend that you enter a name that
© Vanderbilt 2019
ACT365 is only available to registered installers. You can register at ACT365.eu.
22
beside a customer name to enter the customer
Configuring ACT365-VCU
A-100528-b
20.05.2019
Advertisement
Table of Contents
