Adding Cameras Manually - Vanderbilt ACT365-VCU Installation And Operating Instructions Manual

ACT365-VCU / ACT365-VCU2A / ACT365-VCUPoE – Installation and Operating Instructions
6. Select the Record check box if the ACT365-VCU should record camera footage. The ACT365-VCU
will record approximately 20 days of camera footage (dependent on the type of scene the camera is
viewing). Once the ACT365-VCU data storage limit is reached, data is recycled. When data is
recycled, the oldest data is removed first.
If you do not select Record, the ACT365-VCU will support live view only.
7. Click Add.
The camera is added to the ACT365 Installer Portal at ACT365.eu.
A summary of the camera settings is displayed on the Cameras tab.
After a camera has been added, it appears in the Selected Cameras list and is accessible on ACT365.

5.3 Adding Cameras Manually

If a camera has not been discovered automatically, or is on a different IP subnet, you can add the camera
manually.
Note: Only expert users should manually add cameras. A camera stream URL must be entered
manually, and any inaccurate data entered could adversely affect the ACT365-VCU operation.
To add a camera manually, log in to the ACT365-VCU web interface (see Accessing the ACT365-VCU
web interface on page 17), then:
1. Click the Cameras tab.
2. Click Add Manual.
The Probe Device dialog displays.
© Vanderbilt 2019 20
Configuring ACT365-VCU
A-100528-b
20.05.2019