Taylor C706 Operator's Manual page 27

3. Slide the pump valve gasket into the holes on the
cap. Do not lubricate the gasket.
Figure 6-15
4. Insert the valve body cap into the hole in the mix inlet
adapter.
Figure 6-16
5. Assemble the piston. Slide the red O-ring into the
groove of the piston. Do not lubricate the O-ring.
Figure 6-17
Operating Procedures
6. Lightly lubricate the inside of the pump cylinder at the
bottom with a paper thin layer of lubricant.
15110
7. Insert the piston into the bottom of the pump cylinder.
15111
8. Insert the mix inlet assembly into the pump cylinder.
15117
Model C706
OPERATING PROCEDURES
Figure 6-18
Figure 6-19
Figure 6-20
15206
15204
6
15205
6-5