Pepperl+Fuchs ENI58PL-S Series Manual page 25

ENI58PL-S***, ENI58PL-R***
IO-Link Programming
As your settings are transferred to the device during live operation, you do not need to save
your programming separately.
Programming the rotary encoder
Edit the relevant parameters.
As your settings are transferred directly to the device during live operation, you do not need
to save your programming separately.
Note!
When the programming has been completed, you can disconnect the rotary encoder from the
SmartBridge®. To use the rotary encoder in normal operation with a higher-level control panel,
you must use a suitable connection cable (see chapter 3.3 for the connection assignment).
24