Table of Contents
Advertisement
ENI58PL-S***, ENI58PL-R***
Commissioning
Setting Up Sensor Communication Using PACTware (Step by Step)
1. Launch PACTware by double-clicking the PACTware icon.
Figure 4.1
2. Click Project (1) at the top left.
3. Click Host PC (2), then click the right mouse button and select Add device (3).
A window for selecting the device is displayed.
4. Check "IO-Link USB master..." in the window and click OK to confirm.
The IO-Link USB master is installed in the project as a device.
5. Under Project, click IO-Link USB master... (4), then click the right mouse button and select
Add device from the menu that opens.
Figure 4.2
The window for selecting devices is displayed again with all available DTMs and IODDs.
6. Select the required DTM and use OK to confirm.
The DTM is installed in the project (5) here as example "ENI58PL-1024CGR series
IODD1.1."
7. Click the icon for setting up the connection (6).
16
1
2
4
5
3
6
Advertisement
Table of Contents
