Pepperl+Fuchs ENI58PL-S Series Manual page 19

ENI58PL-S***, ENI58PL-R***
Commissioning
Figure 4.6
7. Tap + (3) to add the IODD and the GDD. First, select Add IODD... (4), and then select Add
GDD... (5).
If the files were implemented successfully, they will be displayed in the menu under
Local IODD and Local GDD.
8. Close and reopen the SmartBridge® app.
Note!
To carry out the subsequent steps, the SmartBridge must be supplied with power and the
rotary encoder must be connected to the SmartBridge via a cordset.
4
5
3
19