Pepperl+Fuchs ENI58PL-S Series Manual page 20

ENI58PL-S***, ENI58PL-R***
Commissioning
SmartBridge® Authentication
When the mobile device is initially connected with the SmartBridge interface, an authentication
process first takes place between the communication partners. For this, each SmartBridge
interface has a unique device key. The device key is located on the back of the SmartBridge
interface in the form of a QR code and as text with the name "Key." After the initial connection,
the SmartBridge app remembers the device key. The user does not need to enter it again, but
must simply confirm it to establish the connection.
1. From the menu, select the SmartBridge interface you would like to use and follow any further
instructions.
On delivery, the interface name is "SB_PF." The user can change this. To do so at a later
point, go to "SmartBridge Settings" and "Local name."
2. Share the device key to the mobile device:
Either by typing in the key
or
by reading in the QR code using the mobile device's camera. Tap the Scan Code button
when using the camera.
Figure 4.7
20