Accessories; Programming Aids For Use With The Io-Link Master Usb; Programming Aids For Use With The Smartbridge - Pepperl+Fuchs ENI58PL-S Series Manual

ENI58PL-S***, ENI58PL-R***
Product Description
2.2

Accessories

Various accessories are available.
2.2.1

Programming Aids for Use with the IO-Link Master USB

Note!
The simplest way to obtain the software products listed below is to download them from the
www.pepperl-fuchs.com website on the product page for the relevant ENI58PL rotary
encoder.
The following programming aids are available:
Designation
PACTware
Pepperl-Fuchs-ENI58PL-
1024CGR-IODD1.0.0
IODD Interpreter DTM
IO-Link-Master02-USB
IO-Link-Master02-USB
DTM
PACTware IO-Link
Connection Wizard
Table 2.1
2.2.2 Programming Aids for Use with the SmartBridge®
Designation
Pepperl-Fuchs-ENI58PL-
1024CGR-IODD1.0.0
SmartBridge® WRM-
F301-IO-B15-2V15
24 V power supply
Table 2.2
8
Description
FDT frame application for operating IODDs and DTMs
IODD IO Device Description—device description for
programming the rotary encoder
See the product page for the relevant ENI58PL at www.pepperl-
fuchs.com.
Software for integrating IODDs into an FDT frame application
(e.g., PACTware).
USB to IO-Link adapter box for controlling an IO-Link sensor
directly via a PC.
Device type manager—software for operating the IO-Link-
Master02 USB via FDT.
Add-in for PACTware that enables automatic detection of the
connected IO-Link master USB and IO-Link sensor, also offering
automatic setup of PACTware projects and connection to the IO-
Link sensor.
Description
IODD IO Device Description—device description for
programming the rotary encoder
See the product page for the relevant ENI58PL at www.pepperl-
fuchs.com.
IO-Link/Bluetooth interface using SmartBridge technology for
programming IO-Link devices using a mobile end device and the
SmartBridge® app.
24 VDC power supply for SmartBridge and rotary encoders
(power of at least 24 W, with 1 A output current). To be provided
by the customer.