Installing A Tabletop Adb Controller; Figure 3-9. Installing An E281-2303 Tabletop Adb Controller - Elo TouchSystems IntelliTouch Ultra Product Manual

22 22
Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation

Installing a Tabletop ADB Controller

Installing a Tabletop ADB Controller
Figure 3-9. Installing an E281-2303 Tabletop ADB Controller Figure 3-9. Installing an E281-2303 Tabletop ADB Controller
The controller is shipped preconfigured for use with the Elo MonitorMouse for The controller is shipped preconfigured for use with the Elo MonitorMouse for
Macintosh driver software. No changes are necessary for most users. Specific Macintosh driver software. No changes are necessary for most users. Specific
settings and options available for your controller are listed in the settings and options available for your controller are listed in the
for Macintosh User's Gu for Macinto sh User's Guide
To inspect or change the switch or jumper settings, unplug the controller and open To inspect or change the switch or jumper settings, unplug the controller and open
the enclosure by removing the four screws from the bottom. the enclosure by removing the four screws from the bottom.
Proceed to Proceed to
Where to Go from Here Where to Go from Here
. .
ide
, page 23. , page 23.
MonitorMouse se MonitorMou