Suggested Tools - Elo TouchSystems IntelliTouch Ultra Product Manual

Suggested Tools

Suggested Tools
D D
ISASSEMBLING THE ISASSEMBLING THE
The following is a list of tools that may be needed to install the touchscreen. Some The following is a list of tools that may be needed to install the touchscreen. Some
of the tools are optional, but will be useful if needed. of the tools are optional, but will be useful if needed.
Long (at least 9 inches, 200 mm) flat blade screwdriver with insulated handle Long (at least 9 inches, 200 mm) flat blade screwdriver with insulated handle
• •
• • Clip lead or heavy-gauge wire Clip lead or heavy-gauge wire
#2 Phillips screwdriver #2 Phillips screwdriver
• •
Scissors Scissors
• •
X-Acto knife (No. 11 blade) or hand milling tool X-Acto knife (No. 11 blade) or hand milling tool
• •
• • DB9 hole punch DB9 hole punch
Cable ties Cable ties
• •
Household glass cleaner Household glass cleaner
• •
Paper towels Paper towels
• •
• • Small containers or plastic bags to hold loose parts Small containers or plastic bags to hold loose parts
The Elo Touchscreen Installation Kit (P/N UK0001) is also recommended, and The Elo Touchscreen Installation Kit (P/N UK0001) is also recommended, and
includes commonly used materials needed for touchscreen installation. This kit is includes commonly used materials needed for touchscreen installation. This kit is
useful for identifying preferred materials for your own procurement and may also useful for identifying preferred materials for your own procurement and may also
be cost-effective and convenient when purchased for a limited number of be cost-effective and convenient when purchased for a limited number of
installations. installations.
A copy of the monitor manufacturer's service manual is also useful, if available. A copy of the monitor manufacturer's service manual is also useful, if available.
D D
ISPLAY ISPLAY
Disassemble the display on a large, well-lit work surface. Leave space to set aside Disassemble the display on a large, well-lit work surface. Leave space to set aside
major display components. Group screws and other hardware in small containers major display components. Group screws and other hardware in small containers
or in specific areas on the work surface as you remove them, in relation to the part or in specific areas on the work surface as you remove them, in relation to the part
of the display where you are working. If you complete the installation process in of the display where you are working. If you complete the installation process in
one session (which may require several hours for your first efforts), it is unlikely one session (which may require several hours for your first efforts), it is unlikely
that you will have trouble reassembling the display. that you will have trouble reassembling the display.
Disassembling the D Disassem bling the Display isplay
29 29