Installing A Pc-Bus Controller Installing An External Serial Controller; Figure 3-6. Installing An E281-4035 Pc-Bus Controller - Elo TouchSystems IntelliTouch Ultra Product Manual

Installing a PC-Bus Controller Installing a PC-Bus Controller
Figure 3-6. Installing an E281-4035 PC-Bus Controller Figure 3-6. Installing an E281-4035 PC-Bus Controller
Configure the Controller Configure the Controller
The controller is shipped preconfigured for use with the Elo ELODEV and The controller is shipped preconfigured for use with the Elo ELODEV and
MonitorMouse driver software. Except for the Base I/O Port and Interrupt (IRQ) MonitorMouse driver software. Except for the Base I/O Port and Interrupt (IRQ)
settings, no changes are necessary for most users. Specific jumper settings and settings, no changes are necessary for most users. Specific jumper settings and
options available for your controller are listed in the Elo software manuals and in options available for your controller are listed in the Elo software manuals and in
Appendix B. Appendix B.
Proceed to Proceed to Where to Go from Here Where to Go from Here
Touch Monitor Connections Touch Monitor Connections
, page 23. , page 23.
19 19