1. Manuals
  2. Brands
  3. Elo TouchSystems Manuals
  4. Touchscreen
  5. IntelliTouch Ultra
  6. Product manual

Elo TouchSystems IntelliTouch Ultra Product Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
   
IntelliTouch
IntelliTouch
Ultra
Ultra
Product Manual
Product Manual
Revision 3.2
Revision 3.2
® ®
™ ™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IntelliTouch Ultra and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Elo TouchSystems IntelliTouch Ultra

Summary of Contents for Elo TouchSystems IntelliTouch Ultra

  • Page 1     ® ® IntelliTouch IntelliTouch ™ ™ Ultra Ultra Product Manual Product Manual Revision 3.2 Revision 3.2...
  • Page 2 ™ ™ IntelliTouch IntelliTouch Ultra Ultra Product Manual Product Manual (Revision 3.2) (Revision 3.2) Elo TouchSystems, Inc. Elo TouchSystems, Inc. 1-800-ELOTOUCH 1-800-ELOTOUCH www.elotouch.com www.elotouch.com A Raychem Company A Raychem Company P/N 008212 DOC # SW000016-B P/N 008212 DOC # SW000016-B...
  • Page 3 Copyright Copyright Copyright © 1989, 1992, 1995, 1996 by Elo TouchSystems, Inc. All rights reserved. Reproduction, adaptation, or Copyright © 1989, 1992, 1995, 1996 by Elo TouchSystems, Inc. All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, e translation without prior written permission is prohibited, except as allowed under xcept as allowed under copyright laws.
  • Page 4     (f) Buyer assumes the (f) Buyer assumes the risk and agrees to risk and agrees to indemnify Seller against and hold indemnify Seller against and hold Seller harmless from all liability relating to (i) Seller harmless from all liability relating to (i) assessing the suitability for Buyer's intended use of the Products and of any system design or drawing and (ii) determining assessing the suitability for Buyer's intended use of the Products and of any system design or drawing and (ii) determining the compliance of Buyer's use of the Products with applicable laws, regulations, codes and standards.
  • Page 5     iv iv...

  • Page 6: Table Of Contents

        Contents Contents Chapter 1 - Introduction Chapter 1 - Introduction ..............Introducing Touchscreens Introducing Touchscreens   ........  ........About this Manual About this Manual   ..........  ..........Shipping Damage Shipping Damage   ..........  ..........Care and Cleaning Care and Cleaning  ..........
  • Page 7     System Evaluation System Evaluation  ........ ........Flat Panel Display Integration Flat Panel Display Integration  ........ ........Where to Go from Where to Go from Here Here ................Appendix A - Troubleshooting Guide Appendix A - Troubleshooting Guide  ...
  • Page 8 UL Compliance ................ Fire Retardation Fire Retardation  ........ ........FCC Compliance FCC Compliance ..............IntelliTouch Ultra Serial Controller (E281-2310) IntelliTouch Ultra Serial Controller (E281-2310) ..........Electrical Electrical .................... Supply Voltage and Current Supply Voltage and Current ......
  • Page 9     Physical Characteristics Physical Characteristics ..............Construction Construction   ........  ........Dimensions Dimensions ................Mounting Hole Dimensions Mounting Hole Dimensions  ...... ......Connectors and Pin Definitions Connectors and Pin Definitions  ...... ......Serial Input/Output Connector Serial Input/Output Connector  ...
  • Page 10     List of Figures List of Figures Figure 2-1. IntelliTouch Touchscreen Figure 2-1. IntelliTouch Touchscreen   ........  ........Figure 3-1. Touch Monitor with Internal Serial Controller Figure 3-1. Touch Monitor with Internal Serial Controller   .....   ..... Figure 3-2.
  • Page 11    ...

  • Page 12: Chapter 1 - Introduction

          Introduction Introduction     • • Introducing Touchscreens  Introducing Touchscreens      1 1     • • About this Manual  About this Manual      2 2     • • Shipping Damage  Shipping Damage      4 4  ...

  • Page 13: About This Manual

    A new and sophisticated chipset controller combined with new wave technology. A new and sophisticated chipset controller combined with new antiglare touchscreens makes IntelliTouch Ultra systems the clear choice in the antiglare touchscreens makes IntelliTouch Ultra systems the clear choice in the...
  • Page 14  IntelliTouch control ch controllers, or Inte lers, or IntelliTouch tou lliTouch touchscree chscreens include ns include IntelliTou IntelliTouch Ultra ch Ultra  products  products, unless othe , unless otherwise note rwise noted. d. If a touchscreen is already installed on your display and the system is operational, If a touchscreen is already installed on your display and the system is operational, proceed directly to one of the following software manuals.

  • Page 15: Shipping Damage

        Chapter 1 - Introduction Chapter 1 - Introduction Append endix ix A A Giv Gives es tro troubl ublesh eshoot ooting ing tip tips. s. Appe Appendix B ndix B Prov Provides qu ides quick- ick-refe referenc rence info e informat rmation on co ion on contro...

  • Page 16: Contacting Elo

        Contacting Elo Contacting Elo ONTACTING ONTACTING Technical Support: Technical Support: V V O O I I C C E E : : ( ( 4 4 2 2 3 3 ) ) 2 2 2 2 0 0 - - 4 4 2 2 9 9 9 9 F F A A X X : : ( ( 4 4 2 2 3 3 ) ) 4 4 8 8 2 2 - - 6 6 6 6 1 1 7 7 E-MAIL:...
  • Page 17     Chapter 1 - Introduction Chapter 1 - Introduction...

  • Page 18: Chapter 2 - About Intellitouch Touchscreens

    Driver Software      10 NTRODUCTION NTRODUCTION The Elo IntelliTouch Ultra touchscreen system consists of a touchscreen and an The Elo IntelliTouch Ultra touchscreen system consists of a touchscreen and an electronic touchscreen controller. The IntelliTouch touchscreen is based on electronic touchscreen controller.

  • Page 19: The Intellitouch The Intellitouch Touchscree Touchscreen

    OUCHSCREEN OUCHSCREEN The IntelliTouch Ultra surface wave technology touchscreen consists of a glass The IntelliTouch Ultra surface wave technology touchscreen consists of a glass panel molded to the precise shape of a display's face. It may be clear for best panel molded to the precise shape of a display's face.

  • Page 20: Figure 2-1. Intellitouch Touchscreen

    This allows the controller to ignore waveform acquired in an untouched condition. This allows the controller to ignore contamination such as dirt and scratches. IntelliTouch Ultra controllers contamination such as dirt and scratches. IntelliTouch Ultra controllers instantaneously detect and factor out contamination.

  • Page 21: The Intellitouch The Intellitouch Controllers Controllers

    An IntelliTouch Ultra controller is available with a serial RS-232 interface. An IntelliTouch Ultra controller is available with a serial RS-232 interface. Original IntelliTouch controllers are also available with PC-Bus (ISA or EISA...

  • Page 22: Chapter 3 - Touch Monitor Installation

          Touch Monitor Installation Touch Monitor Installation     • • Touch Monitor Benefits  Touch Monitor Benefits      11     • • Touch Monitor Touch Monitor Configurations Configurations 12     • • Touch Monitor Connections  Touch Monitor Connections ...

  • Page 23: Touch Monitor Configurations

        E281-4035 PC-Bus Controller (P/N 002856-35-K1) E281-4035 PC-Bus Controller (P/N 002856-35-K1) • •     E281-2310MX (IntelliTouch Ultra) External Serial Controller (P/N E281-2310MX (IntelliTouch Ultra) External Serial Controller (P/N • • 002310MX-UK1/UK2/K1) 002310MX-UK1/UK2/K1)     • •...

  • Page 24: Figure 3-1. Touch Monitor With Internal Serial Controller

        13 13 Touch Monitor Configurations Touch Monitor Configurations Touch Monitor with Internal Serial Controller Touch Monitor with Internal Serial Controller This configuration includes a touch monitor with an internal E281-2310 serial This configuration includes a touch monitor with an internal E281-2310 serial controller and a serial cable.

  • Page 25: Figure 3-2. Pc-Bus Controller

        14 14 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation PC-Bus Controller PC-Bus Controller E281-4035 PC-Bus controllers plug directly into a slot in your computer and do E281-4035 PC-Bus controllers plug directly into a slot in your computer and do not require a special enclosure or power supply.

  • Page 26: Figure 3-3. Touch Monitor With External Serial Controller

        15 15 Touch Monitor Configurations Touch Monitor Configurations External Serial Controller External Serial Controller The E281-2310MX family of external serial controllers connects to the serial port The E281-2310MX family of external serial controllers connects to the serial port on your computer.

  • Page 27: Figure 3-4. Touch Monitor With Tabletop Adb Controller

        16 16 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation Tabletop ADB Controller Tabletop ADB Controller The E281-2303 Tabletop ADB Controller connects to the ADB port on your The E281-2303 Tabletop ADB Controller connects to the ADB port on your Macintosh computer and includes an external power supply.

  • Page 28: Touch Monitor Connections

        17 17 Touch Monitor Connections Touch Monitor Connections OUCH OUCH ONITOR ONITOR ONNECTIONS ONNECTIONS Connecting the Power and Video Connecting the Power and Video If you do not have a touchscreen installed in your display, skip to Chapter 4, If you do not have a touchscreen installed in your display, skip to Chapter 4, which details the installation of touchscreen and controller components.

  • Page 29: Installing A Touch Monitor With An Internal Serial Controller

        18 18 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation Installing a Touch Monitor with an Internal Serial Controller Installing a Touch Monitor with an Internal Serial Controller The E281-2310 controller is internal to the monitor and is shipped preconfigured The E281-2310 controller is internal to the monitor and is shipped preconfigured ™...

  • Page 30: Installing A Pc-Bus Controller Installing An External Serial Controller

        19 19 Touch Monitor Connections Touch Monitor Connections Installing a PC-Bus Controller Installing a PC-Bus Controller Figure 3-6. Installing an E281-4035 PC-Bus Controller  Figure 3-6. Installing an E281-4035 PC-Bus Controller  Configure the Controller  Configure the Controller  The controller is shipped preconfigured for use with the Elo ELODEV and The controller is shipped preconfigured for use with the Elo ELODEV and MonitorMouse driver software.

  • Page 31: Figure 3-7. Installing An E281-2310Mx-Uk1/-Uk2 External Serial Controller

            20 20 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation Installing an External Serial Controller Installing an External Serial Controller E281-2310MX-UK1/-UK2 (Display Mount) E281-2310MX-UK1/-UK2 (Display Mount) CAUTION CAUTION  Before us  Before using a keybo ing a keyboard power ard power tap, be sure tap, be sure sufficient p...

  • Page 32: Figure 3-8. Installing An E281-2310Mx-K1 External Serial Controller

        21 21 Touch Monitor Connections Touch Monitor Connections E281-2310MX-K1 (Desktop) E281-2310MX-K1 (Desktop) Figure 3-8. Installing an E281-2310MX-K1 External Serial Controller  Figure 3-8. Installing an E281-2310MX-K1 External Serial Controller  The controller is shipped preconfigured for use with the Elo ELODEV and The controller is shipped preconfigured for use with the Elo ELODEV and MonitorMouse driver software.

  • Page 33: Installing A Tabletop Adb Controller

        22 22 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation Installing a Tabletop ADB Controller Installing a Tabletop ADB Controller Figure 3-9. Installing an E281-2303 Tabletop ADB Controller  Figure 3-9. Installing an E281-2303 Tabletop ADB Controller  The controller is shipped preconfigured for use with the Elo MonitorMouse for The controller is shipped preconfigured for use with the Elo MonitorMouse for Macintosh driver software.

  • Page 34: Where To Go From Where To Go From Here Here

        23 23 Where to Go from Here Where to Go from Here E281-2303 ADB Controller Board Kit  E281-2303 ADB Controller Board Kit  The E281-2303 ADB controller can also be ordered in a kit without the enclosure. The E281-2303 ADB controller can also be ordered in a kit without the enclosure. Model numbers, descriptions, and part numbers for the kit and its components are Model numbers, descriptions, and part numbers for the kit and its components are given below:...
  • Page 35     24 24 Chapter 3 - Touch Monitor Installation Chapter 3 - Touch Monitor Installation...

  • Page 36: Chapter 4 - Component Installation

          Component Installation Component Installation     • • Safety Information  Safety Information      26     • • Getting Started  Getting Started      27     • • Disassembling the Disassembling the Displa Display  y      29  ...

  • Page 37: Safety Information

        26 26 Chapter 4 - Component Installation Chapter 4 - Component Installation While this chapter refers primarily to CRT-based display technologies, much of  While this chapter refers primarily to CRT-based display technologies, much of  this information can be applied to other display technologies. See this information can be applied to other display technologies.

  • Page 38: Getting Started

    ETTING ETTING TARTED TARTED IntelliTouch Ultra touchscreens can be installed on most types of displays. Figure IntelliTouch Ultra touchscreens can be installed on most types of displays. Figure 4-1 shows a typical installation. 4-1 shows a typical installation. Figure 4-1. Typical IntelliTouch Touchscreen Installation (for use with external controller) Figure 4-1.

  • Page 39: Testing Components

        28 28 Chapter 4 - Component Installation Chapter 4 - Component Installation Without prior approval of the display manufacturer, you will probably void the Without prior approval of the display manufacturer, you will probably void the display's warranty by disassembling it. Also, it will be necessary to recertify the display's warranty by disassembling it.

  • Page 40: Suggested Tools

        29 29  Disassem  Disassembling the D bling the Display isplay Suggested Tools Suggested Tools The following is a list of tools that may be needed to install the touchscreen. Some The following is a list of tools that may be needed to install the touchscreen. Some of the tools are optional, but will be useful if needed.

  • Page 41: Removing The Back Case

            30 30 Chapter 4 - Component Installation Chapter 4 - Component Installation Most display manufacturers connect the major components with detachable cables Most display manufacturers connect the major components with detachable cables that have labeled and keyed connectors; these cables are of lengths that will that have labeled and keyed connectors;...
  • Page 42     31 31  Disassem  Disassembling the D bling the Display isplay The anode lead of the display feeds high voltage from the flyback transformer to The anode lead of the display feeds high voltage from the flyback transformer to the anode button on the CRT.

  • Page 43: Removing The Electronics Chassis

        32 32 Chapter 4 - Component Installation Chapter 4 - Component Installation Removing the Electronics Chassis Removing the Electronics Chassis Continue disassembling the display until the face of the CRT is completely Continue disassembling the display until the face of the CRT is completely exposed.

  • Page 44: Removing The Crt

        33 33  Disassem  Disassembling the D bling the Display isplay frame. As you pull the chassis away from the bezel, make sure that cables and frame. As you pull the chassis away from the bezel, make sure that cables and circuit boards do not hit the neck of the CRT and that nothing becomes caught on circuit boards do not hit the neck of the CRT and that nothing becomes caught on the adjustment rings or other components on the neck of the CRT.

  • Page 45: Mounting The Touchscreen

        34 34 Chapter 4 - Component Installation Chapter 4 - Component Installation It is often necessary to cut ribs and struts inside the bezel. Cutting does not It is often necessary to cut ribs and struts inside the bezel. Cutting does not  ...

  • Page 46: Figure 4-2. Rear View Of Intellitouch Touchscreen With Mounting Materials

        35 35  Mounting  Mounting the Touch the Touchscreen screen     Creating enough space between the CRT and the bezel to accommodate the Creating enough space between the CRT and the bezel to accommodate the • • touchscreen and the transducers. Adequate spacing can normally be accom- touchscreen and the transducers.
  • Page 47     36 36 Chapter 4 - Component Installation Chapter 4 - Component Installation Before mounting the touchscreen, clean the face of the display and the back of the Before mounting the touchscreen, clean the face of the display and the back of the touchscreen with household glass cleaner.

  • Page 48: Spacing The Crt From The Bezel

        37 37  Mounting  Mounting the Touch the Touchscreen screen     Inspect your results carefully for alignment, trapped dust or lint, and a good Inspect your results carefully for alignment, trapped dust or lint, and a good • • seal between the touchscreen and CRT.

  • Page 49: Controller Interface Options

        38 38 Chapter 4 - Component Installation Chapter 4 - Component Installation ONTROLLER ONTROLLER NTERFACE NTERFACE PTIONS PTIONS Elo offers serial (RS-232), PC-Bus, Apple Desktop Bus (ADB), and Compact Elo offers serial (RS-232), PC-Bus, Apple Desktop Bus (ADB), and Compact Disc Interactive (CD-i) controllers for IntelliTouch touchscreens.

  • Page 50: Figure 4-3. Touchscreen Cabling System For Internal Serial Controller

        39 39 Controller Interface Options Controller Interface Options Figure 4-3. Touchscreen Cabling System for Internal Serial Controller  Figure 4-3. Touchscreen Cabling System for Internal Serial Controller  The mounting holes of the E281-2310 serial controller are sized for 0.156-inch The mounting holes of the E281-2310 serial controller are sized for 0.156-inch (4 mm) snap-in standoffs.
  • Page 51     40 40 Chapter 4 - Component Installation Chapter 4 - Component Installation Follow these steps to install the controller, using the IntelliTouch Internal Follow these steps to install the controller, using the IntelliTouch Internal SmartSet Controller Kit (P/N UK2310): SmartSet Controller Kit (P/N UK2310): 1.

  • Page 52: External Serial Controller

        41 41 Controller Interface Options Controller Interface Options - - R R e e s s e e t t O O p p e e n n c c o o l l l l e e c c t t o o r r i i n n p p u u t t : : o o p p e e n n = = n n o o r r m m a a l l operation;...
  • Page 53     42 42 Chapter 4 - Component Installation Chapter 4 - Component Installation     The serial cable is permanently connected to the controller and features an The serial cable is permanently connected to the controller and features an •...
  • Page 54     43 43 Controller Interface Options Controller Interface Options     Another method of providing power to the controller is to install a power Another method of providing power to the controller is to install a power • • supply (P/N 004100-204-K1), which requires a 100-240 Vac input.

  • Page 55: External Pc-Bus Controller

        44 44 Chapter 4 - Component Installation Chapter 4 - Component Installation External PC-Bus Controller External PC-Bus Controller Using an external PC-Bus controller may be the simplest overall integration Using an external PC-Bus controller may be the simplest overall integration process.

  • Page 56: Routing The Touchscreen Cables

        45 45  Routing  Routing the Touch the Touchscreen C screen Cables ables Mounting the IC1 cable to the plastic case. Plastic cases are usually rather Mounting the IC1 cable to the plastic case. Plastic cases are usually rather  ...

  • Page 57: Reassembling The Display

        46 46 Chapter 4 - Component Installation Chapter 4 - Component Installation     • • the video input cable the video input cable     the horizontal and vertical oscillator/drive sections the horizontal and vertical oscillator/drive sections •...

  • Page 58: Sealing

        47 47 Sealing Sealing If available, re-glue the CRT circuit board to the connector with an electronic- If available, re-glue the CRT circuit board to the connector with an electronic- grade (non-corrosive) silicone adhesive (such as GE RTV-162). Discharge the grade (non-corrosive) silicone adhesive (such as GE RTV-162).

  • Page 59: Material Selection

        48 48 Chapter 4 - Component Installation Chapter 4 - Component Installation Material Selection Material Selection Many materials may be used to create a seal for an IntelliTouch system. Relatively Many materials may be used to create a seal for an IntelliTouch system. Relatively hard seal materials are preferred, such as metal, hard plastics and high-durometer hard seal materials are preferred, such as metal, hard plastics and high-durometer rubber.

  • Page 60: System Evaluation

        49 49 Flat Panel Display Integration Flat Panel Display Integration System Evaluation System Evaluation As the IntelliTouch system gain is dynamic, and responds to a changing environ- As the IntelliTouch system gain is dynamic, and responds to a changing environ- ment quickly, the application of a seal to the system typically produces no user ment quickly, the application of a seal to the system typically produces no user perceivable effects.
  • Page 61     50 50 Chapter 4 - Component Installation Chapter 4 - Component Installation...

  • Page 62: Appendix A - Troubleshooting Guide

            Troubleshooting Guide Troubleshooting Guide     • • The Troubleshooting Process  The Troubleshooting Process      51     • • Display Problems  Display Problems      52     • • Software Troubleshooting  Software Troubleshooting ...

  • Page 63: Display Problems

    The IntelliTouch Ultra touchscreen is powered from its controller. Usually the The IntelliTouch Ultra touchscreen is powered from its controller. Usually the display and touchscreen controller have separate power supplies and operate display and touchscreen controller have separate power supplies and operate independently.

  • Page 64: Calibration N Problems Calibratio Problems

        53 53  Hardwar  Hardware Troubles e Troubleshooting hooting For detailed troubleshooting information on MonitorMouse for Windows, For detailed troubleshooting information on MonitorMouse for Windows, MonitorMouse for DOS, MonitorMouse for DOS, ELODEV, and TouchBack, see MonitorMouse for DOS, MonitorMouse for DOS, ELODEV, and TouchBack, see .

  • Page 65: Serial Controller

        54 54  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide      If the system is reporting touch data at a slow or  If the system is reporting touch data at a slow or •...

  • Page 66: E281-2310 Controller Protocol

        55 55  Hardwar  Hardware Troubles e Troubleshooting hooting E281-2310 Controller Protocol  E281-2310 Controller Protocol  The ten-byte binary data format displayed in hex by COMDUMP for correct The ten-byte binary data format displayed in hex by COMDUMP for correct operation with Elo driver software is as follows: operation with Elo driver software is as follows: B B y y t t e e...

  • Page 67: Rs-232 Connections

        56 56  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide Raw coordinates for the E281-2310 serial controller should range from just Raw coordinates for the E281-2310 serial controller should range from just above 0 to just below 4095. When the touchscreen is mounted in its normal above 0 to just below 4095.
  • Page 68     57 57  Hardwar  Hardware Troubles e Troubleshooting hooting P P 2 2 P P i i n n s s D D B B 2 2 5 5 D D B B 9 9 H H o o s s t t S S i i g g n n a a l l S S o o u u r r c c e e D D C C D D ( ( N N / / C C ) ) C C o o n n t t r r o o l l l l e e r r D D S S R R...

  • Page 69: Power Connections

        58 58  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide Power Connections  Power Connections  Check for proper voltage (+5 Vdc) at the power connector P4 pin 1 (+) and pin 4 Check for proper voltage (+5 Vdc) at the power connector P4 pin 1 (+) and pin 4 (-) on the controller (see Figure B-1, page 67).

  • Page 70: Adb Controller

        59 59  Hardwar  Hardware Troubles e Troubleshooting hooting is being displayed continuously without a touch, try disconnecting the touchscreen is being displayed continuously without a touch, try disconnecting the touchscreen cable from the controller. If the data stops, the problem is with the touchscreen or cable from the controller.

  • Page 71: Touchscreen And Touchscreen Cables

        60 60  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide Touchscreen and Touchscreen Cables Touchscreen and Touchscreen Cables If the touchscreen and its attached cable are easily accessible, the touchscreen can If the touchscreen and its attached cable are easily accessible, the touchscreen can be physically inspected for damage to the transducers and cable.

  • Page 72: Ic1 Cable

        61 61  Hardwar  Hardware Troubles e Troubleshooting hooting wave signal. This could be caused by the display bezel being in contact with the wave signal. This could be caused by the display bezel being in contact with the touchscreen, especially on the reflectors.

  • Page 73: Ec2 Cable

        62 62  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide •••••••• ••••••••     1 1 • • • • X X • •     3 3 • • • • • • • •  ...

  • Page 74: E281-2300 Cd-I Controller

        63 63  Hardwar  Hardware Troubles e Troubleshooting hooting then return to the normal flash rate. If the host does not remove the packet from then return to the normal flash rate. If the host does not remove the packet from the controller, the LED will stay lit.

  • Page 75: Diagnostic Codes

        64 64  Appendi  Appendix A - Troubl x A - Troubleshooting eshooting Guide Guide Diagnostic Codes Diagnostic Codes IntelliTouch controller power-on diagnostic codes are typically displayed when an IntelliTouch controller power-on diagnostic codes are typically displayed when an Elo driver is loaded, or through the Touchscreen Control Panel.

  • Page 76: E281-2303 Adb Controller

        65 65  Hardwar  Hardware Troubles e Troubleshooting hooting E281-2303 ADB Controller  E281-2303 ADB Controller  This controller has a two-byte diagnostic code displayed in the form AA-BB by This controller has a two-byte diagnostic code displayed in the form AA-BB by the MonitorMouse for Macintosh Touchscreen Control Panel.

  • Page 77: Appendix B - Controller Appendix B - Controller Configuration Configuration

            Controller Configuration Controller Configuration     • • General Information  General Information      66     • • E281-2310 Serial Controller  E281-2310 Serial Controller      67     • • E281-4035 PC-Bus  E281-4035 PC-Bus ...

  • Page 78: Jumper Settings

    The following figure shows the mounting dimensions, jumper locations, and The following figure shows the mounting dimensions, jumper locations, and connections for the IntelliTouch Ultra E281-2310 serial controller: connections for the IntelliTouch Ultra E281-2310 serial controller: Figure B-1. E281-2310 Serial Controller ...

  • Page 79: E281-2310 Emulation Modes

        68 68  Appendi  Appendix B - Contro x B - Controller Config ller Configuration uration E281-2310 Emulation Modes  E281-2310 Emulation Modes  If you are using driver software that does not directly support the SmartSet™ If you are using driver software that does not directly support the SmartSet™ serial protocol (E281-23xx, E271-22xx), the controller can be set up through serial protocol (E281-23xx, E271-22xx), the controller can be set up through  jumper J2 fo...

  • Page 80: E281-4035 Pc-Bus Controller

        69 69  E281-403  E281-4035 PC-Bus 5 PC-Bus Controlle Controller  r  E281-4035 PC-B E281-4035 PC-B     ONTROLLER ONTROLLER The following figure shows the dimensions, switch and jumper locations, and The following figure shows the dimensions, switch and jumper locations, and connections for the IntelliTouch E281-4035 PC-Bus controller.

  • Page 81: Jumper Settings

        70 70  Appendi  Appendix B - Contro x B - Controller Config ller Configuration uration Jumper Settings Jumper Settings The controller's Base I/O Port address is set with the W2 and W3 jumpers. W3 The controller's Base I/O Port address is set with the W2 and W3 jumpers. W3 selects the high-order address, and W2 the low-order address.

  • Page 82: E281-2303 Adb Controller

        71 71  E281-230  E281-2303 ADB Con 3 ADB Controller  troller  E281-2303 ADB C E281-2303 ADB C ONTROLLER ONTROLLER The following figure shows the mounting dimensions, switch and jumper The following figure shows the mounting dimensions, switch and jumper locations, and connections for the IntelliTouch E281-2303 ADB controller.
  • Page 83     72 72  Appendi  Appendix B - Contro x B - Controller Config ller Configuration uration Switch settings must be as follows: Switch settings must be as follows: S S w w i i t t c c h h P P o o s s i i t t i i o o n n (from top) (from top)

  • Page 84: E281-2300 Cd-I Controller

        73 73  E281-230  E281-2300 CD-i Co 0 CD-i Controller  ntroller  E281-2300 CD- E281-2300 CD- ONTROLLER ONTROLLER The following figure shows the mounting dimensions, jumper locations, and The following figure shows the mounting dimensions, jumper locations, and connections for the IntelliTouch E281-2300 CD-i controller. connections for the IntelliTouch E281-2300 CD-i controller.

  • Page 85: Cd-I Connections

        74 74  Appendi  Appendix B - Contro x B - Controller Config ller Configuration uration 1 1 0 0 % % O O v v e e r r s s c c a a n n J J 8 8 - - N N J9 - Y J9 - Y 1 1 5 5 % % O O v v e e r r s s c c a a n n...
  • Page 86     75 75  E281-230  E281-2300 CD-i Co 0 CD-i Controller  ntroller  See page 56 for P2 connector pin positions and page 65 for DB9 connector pin See page 56 for P2 connector pin positions and page 65 for DB9 connector pin positions.

  • Page 87: Appendix C - Specifications

            Specifications Specifications The following specifications were correct at press time, but are subject to change The following specifications were correct at press time, but are subject to change without notice. without notice. Many of the IntelliTouch specifications are controller-dependent. Refer to the Many of the IntelliTouch specifications are controller-dependent.

  • Page 88: Dimensions

    76 76     77 77  IntelliTou  IntelliTouch Touchs ch Touchscreens creens Dimensions  Dimensions  The following physical dimensions of the touchscreen are specified for each The following physical dimensions of the touchscreen are specified for each model in the model in the  brochure or the appropriate Elo  brochure or the appropriate Elo  IntelliTou...

  • Page 89: Optical

        78 78  Appendix  Appendix C - Specif C - Specifications ications Optical Optical Light Transmission  Light Transmission  90% per ASTM D1003-92. 90% per ASTM D1003-92. Visual Resolution  Visual Resolution  Clear surface: Excellent with no noticeable degradation. Clear surface: Excellent with no noticeable degradation. Anti-glare surface: 6:1 minimum.

  • Page 90: Chemical Resistance

        79 79  IntelliTou  IntelliTouch Touchs ch Touchscreens creens Chemical Resistance  Chemical Resistance  The touch active area of the touchscreen is resistant to all chemicals that do not The touch active area of the touchscreen is resistant to all chemicals that do not affect glass, such as Acetone, Toluene, Methyl Ethyl Ketone, Isopropyl Alcohol, affect glass, such as Acetone, Toluene, Methyl Ethyl Ketone, Isopropyl Alcohol, Methyl Alcohol, Ethyl Acetate, Ammonia-based glass cleaners, Gasoline,...

  • Page 91: Intellitouch Ultra Serial Controller (E281-2310)

        80 80  Appendix  Appendix C - Specif C - Specifications ications (E281-2310) (E281-2310) NTELLI NTELLI OUCH OUCH LTRA LTRA ERIAL ERIAL ONTROLLER ONTROLLER Electrical Electrical Supply Voltage and Current  Supply Voltage and Current  +5 Vdc, nominal (+4.75 to +5.25 Vdc). +5 Vdc, nominal (+4.75 to +5.25 Vdc).

  • Page 92: Environmental

        81 81  IntelliTo  IntelliTouch Ultra S uch Ultra Serial Con erial Controller (E troller (E281-2310 281-2310) ) Environmental Environmental Temperature  Temperature  O O p p e e r r a a t t i i n n g g : : 0 0 °...
  • Page 93     82 82  Appendix  Appendix C - Specif C - Specifications ications Physical Characteristics Physical Characteristics Construction  Construction  Four-layer surface-mount design with internal ground plane for EMI suppression. Four-layer surface-mount design with internal ground plane for EMI suppression. Dimensions  Dimensions ...
  • Page 94 281-2310) ) Agency Approvals Agency Approvals Elo TouchSystems controller board model E281-2310 is a UL Recognized Elo TouchSystems controller board model E281-2310 is a UL Recognized Component, CCN NWGQ2, per UL 1950, Safety of Information Technology Component, CCN NWGQ2, per UL 1950, Safety of Information Technology Equipment Including Electrical Business Equipment.

  • Page 95: Controller

          002310 (E281-2310 Serial Controller 002310 (E281-2310 Serial Controller Component) • Component) • 002856-35-K1 (E281-4035 PC-Bus 002856-35-K1 (E281-4035 PC-Bus absolute coordinates • 9, 10 absolute coordinates • 9, 10 Controller Kit) • 12 Controller Kit) • 12 AccuTouch emulation mode •...
  • Page 96 85 85     86 86  Index -  Index - C-C  C-C  baud rate • 56, 57 baud rate • 56, 57 routing • 39, routing • 39, BBS • 5 BBS • 5 specifications • 78 specifications • 78 bell, CRT •...
  • Page 97     87 87  Index - C  Index - C-C  -C  testing • 28 testing • 28 grounding • 57 grounding • 57 touchscreen • touchscreen •  Figure 4-1  Figure 4-1 installing a touch monitor with internal installing a touch monitor with internal concealed damage •...
  • Page 98     88 88  Index -  Index - D-D normalization/scaling • 9 normalization/scaling • 9 back case, removing • 30 back case, removing • 30 output • 34 output • 34 bezel • 30, 32, 33, 35, 36, bezel • 30, 32, 33, 35, 36, range •...
  • Page 99     89 89  Index - E  Index - E-H  -H  DTE device, data connection • 57 DTE device, data connection • 57 errors, calibration • errors, calibration • , 55 , 55 durability, touchscreen surface • 78 durability, touchscreen surface • 78 escutcheon escutcheon dust seal •...
  • Page 100     90 90  Index -  Index - I-M  I-M  hexadecimal, used in COMDUMP • 55 hexadecimal, used in COMDUMP • 55 inversion of coordinates • 34 inversion of coordinates • 34 high-resolution video images • 46 high-resolution video images • 46 IRQ •...
  • Page 101     91 91  Index -  Index - N-P meaningless coordinates, when using meaningless coordinates, when using BUSSTAT • 59 BUSSTAT • 59 mechanical damage • 32 mechanical damage • 32 panel, flat • 49 panel, flat • 49 Microsoft Windows • Microsoft Windows •...
  • Page 102     92 92  Index -  Index - R-S  R-S  transducer wire • 60 transducer wire • 60 work area • 26 work area • 26 with clearance between CRT bell and with clearance between CRT bell and SAW • SAW •...
  • Page 103     93 93  Index -  Index - T-T  T-T  storage requirements, touchscreen • 79 storage requirements, touchscreen • 79 cable problems • 51, 52, 53, 59, 60 cable problems • 51, 52, 53, 59, 60 stripes, reflector • 8, 34 stripes, reflector •...
  • Page 104     94 94  Index -  Index - U-X  U-X  transmitting • 8 transmitting • 8 transformer, flyback • 31, 45 transformer, flyback • 31, 45 translated screen coordinates • 10 translated screen coordinates • 10 VGA monitor • 53 VGA monitor •...
  • Page 105     95 95  Index -  Index - Y-Z  Y-Z  receiving transducer • 8 receiving transducer • 8 transmitting transducer • 8 transmitting transducer • 8 Y-axis Y-axis coordinates • 8, 9, 55, 59 coordinates • 8, 9, 55, 59 failure •...

Table of Contents