Table of Contents
Advertisement
5.
Inverter Backlight Control mode selection (3-pin LJ3)
MIX-H310D1 Mode Selection for Back
Light Control of Inverter
DC Voltage Control
PWM Control (Default)
6.
AT/ATX Mode selection (2-pin ATX_AT)
MIX-H310D1 H/W AT/ATX mode selection
Pins
1-2 (Default)
2-3
NOTE: Jumper setting of AT_ATX should be consistent with the setting of
Power Mode in BIOS. Refer to section 3.3.8 Power Management in Chapter 3.
2-14
LJ3
1 2
DC CTL
PWM CTL
(Default)
MIX-H310D1
ATX mode
(Default)
MIX-H310D1
2 3
Pins
1-2
2-3
ATX_AT
AT mode
ATX mode
AT mode
MIX-H310D1
Advertisement
Table of Contents
