Aaeon MIX-H310D1 Manual page 33

17. EATX power connector (4-pin EATX_PWR2)
This connector is for EATX power supply plug. The power supply plug
is designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
MIX-H310D1
MIX-H310D1 1 x 4 PIN (2x2)
internal power connector
18. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports HD Audio standard. Connect one end of the front panel audio I/O
module cable to this connector.
MIX-H310D1
MIX-H310D1 Front panel audio connector
IMPORTANT!
• We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard's high-definition audio
capability.
• If you want to connect a high-definition front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD].
Chapter 2: Motherboard information
EATX_PWR2
PIN 1
AAFP
2-25