Aaeon MIX-H310D1 Manual page 26

3. CPU and chassis fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
MIX-H310D1 Fan connectors
CAUTION: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
NOTE: The CPU_FAN connector supports a CPU fan of maximum 2A (24 W)
fan power.
4. LVDS connector (40-pin LVDS)
This connector is for an LCD monitor that supports Low Voltage Differential
Signalling (LVDS) interface.
MIX-H310D1 LVDS connector
2-18
CHA_FAN1 CPU_FAN1
MIX-H310D1
LVDS
+V_PANEL
+V_PANEL
+V_PANEL
GND
LVDS1_D0-
LVDS1_D0+
LVDS1_D1-
LVDS1_D1+
LVDS1_D2-
LVDS1_D2+
LVDS1_D3-
LVDS1_D3+
LVDS0_D0-
LVDS0_D0+
LVDS0_D1-
LVDS0_D1+
LVDS0_D2-
LVDS0_D2+
LVDS0_D3-
LVDS0_D3+
PIN 1
MIX-H310D1
SPD1
NC
+BLVCC
+BLVCC
+BLVCC
LVDS1_CLK-
LVDS1_CLK+
VCON
INV_ENABKL
SPC1
GND
GND
GND
LVDS0_CLK-
LVDS0_CLK+
GND
GND
GND
+3V
NC
MIX-H310D1