Aaeon MIX-H310D1 Manual page 28

7. Front panel system panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
MIX-H310D1 System panel connector
• System power LED (2-pin +PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin +HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
2-20
F_PANEL
+PWR LED
PIN 1
+HDD_LED
MIX-H310D1
PWR BTN
RESET
MIX-H310D1