Installing Batteries - Lockly Vision Installation Manual

Step 6
1
1: With door open and deadbolt fully extended, place ribbon inside compartment and insert 3
batteries only (hold on inserting the 4th) in bottom row (note correct -/+ polarity).
2: Press and HOLD the program button, continue to hold and install the 4th battery. The lock will
automatically start self-check (release program button once check starts). The self-check process
determines right or left swinging door and is very important to ensure correct installation.
IMPORTANT: if lock is not properly installed it will open and close repeatedly (refer to next page #3).
4
2
3
IMPORTANT
Install batteries 5-8 only after
self-check is complete
5 6 7
13

INSTALLING BATTERIES

8
PRESS
& HOLD