Lockly 7S - Fingerprint Deadbolt Manual

Lockly 7S - Fingerprint Deadbolt Manual

Also See for 7S:

Advertisement

Lockly 7S - Fingerprint Deadbolt Manual

Product Highlights

Product Features

Patented Anti-Peep PIN Genie® Keypad
Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number. Location of the numbers are always different every time someone uses the keypad, making it hard for prying eyes to guess the correct code.

Multiple Access Codes & Monitoring
Store up to 18 Access Codes for family, friends and guests, as well as monitor entry and exit records.

Live Monitoring and Voice Control
(Requires Secure Link Wi-fi Hub, sold separately)
Through your smartphone, monitor door access from anywhere in the world and securely control who comes and goes. You can also control your Lockly® smart lock using your voice with Amazon Alexa or Google Assistant.

Complete Privacy
The exterior displayed keypad can be locked and switched off through the Lockly® App. The owner can prevent others trying to input the passcode from the outside and entering the home

Offline Access Code™ (OAC)
The Offline Access Code™ can allow owners to issue access codes, set the allowed access duration, all without Lockly® ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web.

Auto-Lock
Users no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly® will automatically auto-lock the door based on your customized time setting.

Backup Keys and 9V Battery Socket
The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the keypad in case your smart lock runs out of battery.

Product Overview

Product Overview - Outside

Product Overview - Outside

Product Overview - Inside

Product Overview - Inside

Understanding Your New Lock

After the installation of your new Lockly®, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes ,and also how to configure your OAC (Offline Access Code).
For any questions you can always visit http://lockly.com/help for assistance.
Don't forget that Lockly® Secure works best with our iOS and Android app. Please download the app by visiting the link below.

www.apple.com
play.google.com
Scan or visit Lockly.com/app

Reset Button

In order to setup the Lockly® to another smart phone, you must have your "Activation Code" available. The Activation Code can be found on the Activation Code Card (PART U) that came with your smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the Lockly® Secure to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted.
Press Reset Button for one (1) second or till you hear a short beep
Open the Lockly ® smartphone app to add your lock using the Activation Code
If Never Paired Press Reset Button for three (3) seconds
Reset Button

Rebooting Your Lock

warningNOTICE
Reboot Lockly ® in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly ®.
Press and release the reboot button when you want to reboot the lock. Your Lockly® will beep once after reboot. Only reboot when necessary.
To reboot, find the reboot button located on the bottom of the exterior side of Lockly® lock. The reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert the paper clip and press down firmly and let go. Your screen should restart and the lock should reboot automatically.
Rebooting Your Lock

Low Battery

When the battery is in seriously low condition, Lockly® will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon.

Condition Indicator Solution
Low Battery Battery Icon on the display keypad will light up to indicate low battery. Replace batteries immediately to avoid battery failure. Lockly ® Secure can still operate up to 300 cycles in low battery condition.
Dead Battery When there is no display and sounds; and screen is non-functional. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock.

Your Lockly® will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly® to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.
Low Battery

Changing The Battery

Under normal use, the Lockly® battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand.
Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown. Be sure to unscrew the screw located on the top of the cover first by unscrewing counter clockwise before sliding the cover up.
Changing The Battery

  • Make sure the batteries are oriented correctly by matching the orientation displayed.
  • Replacing the batteries do not reset storedAccess Codes.
  • To see a list of recommended brands, please visithttp://Lockly.com/battery.

warningNOTICE
Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required. If you have not yet downloaded the app, visit: Lockly.com/app

Using Your Smart Lock

Configuring Access

warningWe recommend pairing your lock to your smart phone to manage your access codes. Sections refers to locks not paired with a smart phone. Once paired with a smart phone, the Program button will be disabled.
There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here.
To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code.

warningNOTICE
The Default Access Code is 1 2 3 4 5 6
Your new Lockly® Access Code can be any combination of 6 to 8 digits.
Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete an existing Access Code before adding a new code. If you're not using the APP, you can store up to 18 sets of Access Code.

Entering Programming Mode

To enter Programming Mode, remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons.
Simply press the Program button to enter programming mode.
Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Access Codes previously added by Programming mode will be cleared.
To end Programming Mode, press the Program button anytime.
Programming Mode will automatically exit if the keypad is inactive for more than thirty (30) seconds.
Entering Programming Mode

Number Mode
Add Access Code
Delete Access Code
View Access Code

After entering Programming Mode, you should see the screen as displayed to the right on your Lockly® keypad. Follow the following steps to add, delete, or check your Access Codes.

Adding an Access Code

While in Programming Mode, select "1AD" to add an Access Code. If you are not in Programming Mode, please see Entering Programming Mode Section to enter Programming Mode. After pressing "1AD" to add an Access Code.
Adding an Access Code

Enter your new 6 - 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code.
Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number. For example, based on the example image to the left, if you need "1", you can touch the upper left button. For "6", you would touch the upper right button.

If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel.
To exit or cancel, you can always press or

If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK Button to return to the
Programming Screen and try again.

Deleting an Access Code

While in Programming Mode, select "2DE" to delete an Access Code. If you are not in Programming Mode, please enter Programming Mode. After pressing "2DE" to delete an Access Code.

Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 .
Rotate through different Access Codes shown by touching any number on the screen. If you find the Access Code you want to delete, simply hold the OK Button for 3 seconds.

Once you have selected the Access Code you want to delete, Lockly® will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0.
Press to delete, or to cancel.

NOTE
There are two incidents where your Access Code cannot be deleted.

There are no Access Codes set. The factory default Access Code cannot be deleted.

There is only one (1) Access Code saved in the smart lock. At least one code must be registered. Please add another Access Code before attempting to delete the existing code.

Checking the Access Codes

While in Programming Mode, select "3CH" to check registered Access Codes. If you are not in Programming Mode, please see Entering Programming Mode Section to enter Programming Mode.
Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 .
Checking the Access Codes
Rotate through the different Access Codes by touching any number on the screen. To exit Check Access Code screen, simply press the OK Button.

If there are no Access Codes registered in your smart lock, Check Access Code mode will be invalid. The default Access Code will not be shown on the display keypad, and you will see the following screen shown to the left instead.

Lockly® Secure Link adds live status monitoring and voice control capabilities to your Lockly® Smart Lock. Secure Link can be purchased and added anytime.
To set up the Lockly® Model 7S smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the Lockly® App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select "Add a New Device" then select "Secure Link Wi-Fi Hub". Follow the in-app instructions to set up your Secure Link.
To activate voice commands, you will need Amazon Alexa or Google Assistant. Make sure you enable the Lockly® Action for Google Assistant or the Amazon Alexa Skill before you can configure your voice to perform voice commands.
Visit the link below to purchase: https://lockly.com/hub

Locking and Unlocking

Locking/Unlocking with Access Codes

Lockly® Smart Lock can be unlocked using multiple ways - via your stored Access Code, smartphone with Bluetooth, the physical key supplied with your lock, or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed)
Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly ® will flash red light.
Locking/Unlocking with Access Codes - Step 1
warningThree consecutive wrong attempts will put Lockly ® in "Safe Mode".

Lock your Lockly® by pressing the OK Button or by brushing your hand across the screen anytime when the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings.
You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN Genie® version (Recommended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads.
(Sample display shown only)
Locking/Unlocking with Access Codes - Step 2

Locking/Unlocking Lockly® with App

You must have the Lockly® iOS or Android app installed in order to lock and unlock with smartphone and connect with voice assistants like Alexa or Google Assistant. Please download the app by visiting the link below or search "Lockly" from the correct app store.

www.apple.com
play.google.com

Scan or visit Lockly.com/app

Locking/Unlocking with Physical Key

To unlock your lock using the physical key (included), insert your key and turn clockwise or counter clockwise to lock or unlock the door.
Locking/Unlocking with Physical Key

Locking and Unlocking with Voice Assistants

Once your Lockly® Model 7S and Secure Link Wi-Fi Hub has been installed and configured
correctly, make sure you enable the Lockly® Action for Google Assistant or the Amazon Alexa Skill before you can configure your voice to perform voice commands.
You can ask your questions such as door status or request for your door to be locked or unlocked

  • "Hey Google, unlock my Back Door"*
  • "Hey Google, is my Back Door locked?"
  • "Hey Google, lock my Back Door"
  • "Hey Google, is my Back Door unlocked?"

  • Alexa, unlock my Front Door.*
  • Alexa, is my Front Door locked?
  • Hi Alexa, lock my Front Door.
  • Alexa, is my Front Door unlocked?

*Unlock requests will require additional voice security codes.
You may configure it in the settings page.

Safe Mode - Overview

Lockly® will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint or enter thecorrect Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.
Safe Mode - Overview
You will see a "10" on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly® will disable the keypad for 20 minutes, displaying a "20" on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above).
Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen.

Disabling Safe Mode

There are four (4) ways to disable Safe Mode.

Option 1 - Entering Correct Access Code
Activate the keypad by pressing and holding for 3 seconds.
Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered.
Option 2 - Lockly® Bluetooth App
Use the app that is synced to your Lockly® to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you won't be able to use this option to disable Safe Mode.
Option 3 - Physical Key
There is a pair of keys supplied with your new lock. You may use the keys to manually unlock the door and disable Safe Mode. To learn how to use your physical keys.

Advanced Features

Offline Access Code (OAC)

The Offline Access Code(OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app.
To use the OAC feature, make sure you download the Lockly® app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock.
From there, you can then issue an Offline Access Code within the app.
Go to "Access" and choose "Add a New User, then select Offline Access Code (OAC)" and follow on screen instructions to generate your Offline Access Code.

Understanding Offline Access Code (OAC)
OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your Lockly® randomly generates the Offline Access Code which can be shared to your guests together with the instructions generated using the Lockly® app.
After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access Code

Sub-Admin Access

Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly® smart lock. The sub-admin permission can be setup through the Lockly® App then Add A New User.
You can select the Validity Period and User Permissions of the sub-admin.
Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range. Once Sub
Admin control is setup, you as the Admin will no longer be able to issue Offline Access Code™ (OAC)
The Sub-Admin access is ideal for long term property leasing and Airbnb tenants. can enter the Offline Access Code

Re-keying

Lockly® smart lock comes with a 6-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market.
If you are not familiar with this process, please contact a professional locksmith. For more information, visit: http://support.lockly.com/faq/rekeying/
Re-keying

Important Notes

Auto Lock Feature
Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the Lockly® App. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock.

One-Touch Locking
You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly® smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly® App.

9V Backup Access
When your Lockly® is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock.

Physical Keys
Even though you have your fingerprints registered and Access Codes stored, it's always best practice to carry your physical keys with you at all times in case for any reason your lock falls into Safe Mode.

Activation Code
You may find an Activation Card with an Activation Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Activation Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly® and also forgot your Access Code.

Troubleshooting
Please visit http://lockly.com/help for troubleshooting and the most frequently asked questions and answers.

Cleaning

Making sure your Lockly® is clean is best practice to ensure optimal product use. Follow the DOs and DON'Ts below.

DO

  • Rinse the touchscreen with warm water prior to cleaning.
  • Use the application of soap with a damp, lukewarm cloth.
  • Air dry or wipe dry with a soft microfiber cloth to avoid scratches.

DON'T

  • Don't use abrasives, high alkaline cleaners, or gasoline to clean your lock.
  • Don't apply cleaning detergent directly in sunlight or at high temperatures.
  • Don't leave cleaning detergent on the display keypad for long periods of time - wash immediately.
  • Don't use scrapers, squeegees, or razors.

Safety Precautions

Please read all instructions carefully. Remind all Lockly® users of the safety precautions.

Read the following instructions for your own safety
Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries.
Do not use any inappropriate tools that can cause damages or malfunction to your lock.
Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry.
Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge.
Always dispose of used batteries according to your local laws. DO NOT BURN.

warningUnauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly® Smart Lock, contact our customer service department at help@Lockly.com or visit http://lockly.com/help for technical assistance.


For additional support, visit http://lockly.com/help or email help@Lockly.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Lockly 7S - Fingerprint Deadbolt Manual

Advertisement

Need help?

Need help?

Do you have a question about the 7S and is the answer not in the manual?

Questions and answers

Table of Contents